What you can do with it
Store sequencing output and hand an export package to a hub on a USB stick. The files sit on your own computer.
Built for difficult conditions
| Function | What it does |
|---|---|
| Battery | Below half charge the work gets lighter, and below one tenth the device shuts down in an orderly way. |
| Upload | After a break the upload continues. The piece size follows the connection that was measured. |
| Handover without a network | export package to a hub on a USB stick |
| Sequencer | takes sequencing output from MinKNOW, with metadata, from a folder |
That happens with the first customers.
What you need
- Computer Linux, macOS or Windows. Memory of 8 to 16 GB, plus 50 GB free. You need the network only while installation runs. A database is not required.
- Small computer An installer for the Raspberry Pi 5 is in the source. On a real device this installer has not run yet.
What is settled together first
-
What infrastructure is there on site?
-
What connection is available?
-
Which data should stay, and which data should be shared?
-
What training is needed?
-
How is the handover done?
Where it stands
- Checked and still open. The software tells mains power from battery once monitoring is switched on. So far that was checked on mains power. Still open are a restart after a real power cut and a run on a real Raspberry Pi 5.
What it costs
-
€480
Start
-
€600
Compact assessment
- Software. The software is open source (Apache 2.0). There is no licence fee.